Wednesday, December 30, 2009

Miller Welder Generator Welding Machine Into A Home Generator?

Welding machine into a home generator? - miller welder generator

I have a great Miller 40th This is an old machine, and I'm not a very good welder. i accuired this machine for free with a friend. I would this machine as a home builder. I do not want to keep this thing from a welder, is only one generator. How can I squez the energy of this team for this application.

1 comment:

stickwel... said...

There really is not much you can do on the welder, what it is, brought out more power. It has two separate coils, and for AC and others through the strength of the weld. The coil is used in welding and the output voltage of welding has a very mild high. The AC coil is to be delivered for a voltage of 110 volts AC and about 3500-4000 watts continuous power. It can also be an output of 220, but does not remember the older ones had. The most that I can remember only use to 110 volts.

As for improving the management of the welding efficiency and the production increases, which is not very practical, since the two rotors mounted on a common axis. So, if you do not weld, do no additional power of the engine, which is not associated with the loss of friction that would be small. "What May" be possible, the role of AC welding return, but I doubt that the geometry of the support, and if it would cost probably more trouble.

The problem is that this engine is a sealer first and only intended to auxiliary power. It would be completely ineffective his big engine and only get 4000 watts of output power. You can sell the best welders and the money to buy a generator.

Hope that helps

Post a Comment